Pico Tiger Moth T-GWS1020

A breeze to build, the Pico Tiger Moth T-GWS1020 requires at least a 3-channel FM radio system and sub-micro flight pack, which you provide. It features all-foam construction and goes together easily in about four to six hours. No painting is necessary, as all the foam parts are prepainted in authentic Tiger Moth yellow. 

Other scale touches include the Pico Tiger Moth T-GWS1020 trademark swept wings and tails surfaces, black molded cowling, and a decal sheet featuring authentic British markings. Completely assembled, the featherweight flyer weighs in at between 7.5 and 9 ounces, depending on the flight pack that is used.

Indoor aerial adventures Cruising at a stately 7 mph with full control authority, the Pico Tiger Moth T-GWS1020 can fly figure eights in an area no larger than 20' x 40'. The two wings provide enough drag to prevent excessive speed build up, even in a nose-low attitude. Stalls are nice and predictable, occurring around 5 mph with full up elevator and without any tip stall surprises. 

The geared motor and high-efficiency prop that GWS provides with the kit gives the Pico Tiger Moth T-GWS1020 exceptional climb performance. In our tests we could climb from 5' off the floor to the base of a 40' ceiling in just 7 seconds. Power comes from a 150mAh 6-cell pack (not included), which consistently yields about 5 1/2-minute flight times.